Mob./WhatsApp/WeChat:
+86-18615199275
Polyurethane Spray Machine For Insulation

Polyurethane Spray Machine For Insulation

Reanin-K3000 is a professional, cost-effective polyurethane spray and injection machine. It is equipped with a specially designed horizontal booster pump, which not only has small fluctuations in working pressure, but also has less wearing parts and is easy to maintain.

Product Details

Reanin-K3000 is a professional, cost-effective polyurethane spray and injection machine. It is equipped with a specially designed horizontal booster pump, which not only has small fluctuations in working pressure, but also has less wearing parts and is easy to maintain.

 

Benefit:

1. Suitable for two-component polyurethane technology,

2. The horizontal booster pump adopts a perfect coaxial structure design to minimize the wear of the seals. There is no pressure difference during operation, and the value of the commutation pressure fluctuation is stable.

3. The high-speed circulating lubricating fluid in the anti-vulcanized lubricating oil cylinder can quickly remove the leakage of raw materials or impurities, and the ISO shaft is always immersed in the lubricating fluid to avoid crystallization.

4. High production efficiency, especially suitable for the heat treatment of large-area molded objects, fast forming speed and high production efficiency.

5. Adhesion: strong bonding, can be used for concrete, masonry, wood, steel, asphalt, rubber surface bonding;

6. Thermal conductivity: lower than rock wool, glass wool, polystyrene board, building insulation materials, such as extruded sheets;

7. Waterproof performance: the flooding rate exceeds 95%;

8. Sealing performance: no cavity, no seams, completely wrap the outer protection structure of the building, effectively prevent wind and moisture from entering the gap of the building, and achieve complete sealing;

9. Dimensional stability: dimensional stability less than 1%, with a certain elastic deformation ability, elongation is greater than 5%;

10. Constant performance: Polyurethane is an inert material that does not react with acids and bases. It is not a food source for insects and rodents, and it can maintain constant material properties and thermal insulation properties;

11. Wind resistance: compressive strength; 300Kpa, tensile strength > 400Kpa, with strong wind resistance, its foam can be drilled into the wall gap, increasing its shear resistance;

 

Technical Parameters

Model Reanin-K3000 Polyurethane Spray Machine for Insulation
Applicable materials Polyurethane
The ratio of raw material 1:1
Viscosity range of raw materials 200-1000CPS (under working temperature)
Max working pressure 20MPa
Max fluid temperature 80°C
Max output 11kg/min
Max heated hose length 90m
Heater power 4500W×2
Heated hose max power 3000W
Drive model Full pneumatic
Clean mode Self-cleaning by air
Voltage (Optional) Single phase 220V 50Hz

Three phase 380V 50Hz

Whole power 13kw
Pneumatic source 0.6-0.9Mpa 1m³/min

 

Standard Configuration:

Reanin-K3000 mainframe 1 set
Reanin spray gun 1 set
Transfer pump 2 sets
Heated hose 15m
Transfer pump hose 2 pcs
Whip hose 2 pcs
Air pipe 1 set
Tools and spare parts 1 set
English user manual 1 set

 

Transportation Parameters (Based on standard configuration):

Model Reanin-K3000 Polyurethane Spray Machine for Insulation
Package size (LXWXH) 110X80X145cm
Net weight 183kg
Gross weight 220kg

 

The working principle of polyurethane spraying machine:

The working principle of the polyurethane spraying machine is to drive the main cylinder of the polyurethane spraying machine through the air compressor. The cylinder drives the main engine booster pump to press the black material (isocyanate, also called coarse MDI) and white material (combined polyether) in the polyurethane composition. The pressure is about 10Mpa, and then fully mixed and output according to a certain ratio (conventional ratio is 1:1), and the two raw materials after the output undergo a chemical reaction.

 

Why choose us?

1. Our product quality assurance, user feedback is good, our products have passed the European quality system certification.

2. Our service system is perfect. We have a professional R&D team, a systematic production line, a professional electrical engineer, and experienced. Our service personnel will reply to any questions in the first time. If there is any problem with the machine, we will solve the problem within 12 hours.

 

Common problem:

1. Application areas: construction, roads, railways, automobiles, shipbuilding, mining, oil, electricity, food and other industries.

2. Chemical raw materials: polyol and isocyanate;

3. Temperature type: normal temperature;

4. Multi-color product manufacturing: Optional additional color paste addition system.

 

After sales service:

1.Two-year warranty,

2.Factory free training,

3.Paying on-site service.

 

 

Hot Tags: polyurethane spray machine for insulation, manufacturers, suppliers, wholesale, price

Products Inquiry

 
Online Service