
+86-531-55565999
ella@reaninmachinery.com
+86 186 1519 9275
live:.cid.169947ba977c5512
2987529810
Product Description: Kevo-K2000 is a basic type, small and lightweight polyurethane mixing equipment, it is suitable for polyurethane spraying and pouring in various environments, such as wall and roof insulation,…
Product Description:
Kevo-K2000 is a basic type, small and lightweight polyurethane mixing equipment, it is suitable for polyurethane spraying and pouring in various environments, such as wall and roof insulation, ship insulation, cold storage insulation, pipeline insulation and waterproofing, etc.
Kevo-K2000 polyurethane mixing equipment has the advantages of simple structure, simple operation, low failure rate, convenient maintenance and convenient movement.
Advantages:
1. Kevo-K2000 polyurethane mixing equipment has passed the CE certificate.
2. The whole machine adopts full pneumatic control design, which can work normally without electricity,
3. The mainframe is equipped with a shutdown reset function, so that the booster pump shaft is always immersed in the raw material to avoid damage of the booster pump due to crystallization,
4. The specially designed self-cleaning polyurethane spray gun has low failure rate, requires no extensive maintenance work, and is easy to use.
5. The booster pump uses special material seals to resist wear. Simple structure, less wearing parts, convenient maintenance are characteristics of the booster pump,
6. The heater uses the original variable frequency heating technology and uses a built-in temperature sensor to collect the raw material temperature in real time, so that the temperature is more accurate and the temperature buffer range is small,
7. The machine is equipped with high and low pressure triple filter devices, which can effectively filter the crystals and impurities in the raw materials, avoid damage of the booster pump and the spray gun, and avoid blocking the gun during work,
8. Accurate action counters make it easy to calculate the amount of raw materials after finish work.
Technical Parameters
Model | Kevo-K2000 Polyurethane Mixing Equipment |
Applicable materials | Polyurethane |
The ratio of raw material | 1:1 |
Viscosity range of raw materials | 200-1000CPS (under working temperature) |
Max working pressure | 15MPa |
Max fluid temperature | 80°C |
Max output | 10kg/min |
Max heated hose length | 45m |
Heater power | 3000W×2 |
Heated hose max power | 2000W |
Drive model | Full pneumatic |
Clean mode | Self-cleaning by air |
Voltage (Optional) | Single phase 220V 50Hz
Three phase 380V 50Hz |
Whole power | 9kw |
Pneumatic source | 0.5-0.8Mpa 1m³/min |
Standard Configuration:
Kevo-K2000 mainframe | 1 set |
Kevo spray gun | 1 set |
Transfer pump | 2 sets |
Heated hose | 15m |
Transfer pump hose | 2 pcs |
Whip hose | 2 pcs |
Air pipe | 1 set |
Tools and spare parts | 1 set |
English user manual | 1 set |
Transportation Parameters (Based on standard configuration):
Model | Kevo-K2000 Polyurethane Mixing Equipment |
Package size (LXWXH) | 90X75X143cm |
Net weight | 151kg |
Gross weight | 185kg |
Standard features:
1. Replace the design
2. Vertical lifting design with button control for lifting the mixer into and out of the operating position
3. Floor-standing design
4. The mixing container has a bottom of the float and is mounted on the caster
5. Stainless steel 304 type wetted parts, 80 grain polishing
6. Two independently driven agitators, including anchors and high speed dispersers
7. Fully enclosed fan cooling (TEFC) motor design
8. Safety limit switch to prevent the operation of the agitator when the mixing container is removed from the mixing position
After-service:
1. Two years warranty
2. Free training at factory
3. Paid on-site service.
Hot Tags: polyurethane mixing equipment, manufacturers, suppliers, wholesale, price