Mob./WhatsApp/WeChat:
+86-18615199275
Polyurethane Foam Machinery

Polyurethane Foam Machinery

Reanin-K3000 polyurethane foaming machinery is a professional, inexpensive polyurethane spraying machine, this machine can be widely used in construction, road, railway, automobile, shipbuilding, mining, petroleum, electrical, food and other industries.

Product Details

Reanin-K3000 polyurethane foaming machinery is a professional, inexpensive polyurethane spraying machine, this machine can be widely used in construction, road, railway, automobile, shipbuilding, mining, petroleum, electrical, food and other industries.

 

Advantages:

1. Reanin-K3000 polyurethane foaming machinery has passed CE certificate,

2. Pneumatic reversing control assembly, simple structure and reliable operation, so that the pump body can still work without electric,

3. The horizontal booster pump has perfect coaxial structure design, which minimizes the wear of the seals. There is no pressure difference during operation, and the commutation pressure fluctuation value is stable,

4. The high-speed circulating lubricating fluid in the anti-cure lubrication cylinder can quickly take away the leakage of raw materials or impurities, and the ISO shaft is always immersed in the lubricating fluid to avoid crystallization,

5. This machine equipped with high-power heater, original variable frequency heating technology, which makes heating faster and temperature fluctuations smaller, ensuring that raw materials are always at the ideal temperature setting,

6. Built-in heater temperature sensor, collecting raw material temperature in real time, so that temperature control is more accurate,

7. The heated hose covered with insulation layer and wear-resistant sheath, which is safe and durable,

8. Equipped with action counters to accurately calculate the amount of raw materials used after completion.

 

Technical Parameters

Model Reanin-K3000 Polyurethane Foaming Machinery
Applicable materials Polyurethane
The ratio of raw material 1:1
Viscosity range of raw materials 200-1000CPS (under working temperature)
Max working pressure 20MPa
Max fluid temperature 80°C
Max output 11kg/min
Max heated hose length 90m
Heater power 4500W×2
Heated hose max power 3000W
Drive model Full pneumatic
Clean mode Self-cleaning by air
Voltage (Optional) Single phase 220V 50Hz

Three phase 380V 50Hz

Whole power 13kw
Pneumatic source 0.6-0.9Mpa 1m³/min

 

Standard Configuration:

Reanin-K3000 mainframe 1 set
Reanin spray gun 1 set
Transfer pump 2 sets
Heated hose 15m
Transfer pump hose 2 pcs
Whip hose 2 pcs
Air pipe 1 set
Tools and spare parts 1 set
English user manual 1 set

 

Transportation Parameters (Based on standard configuration):

Model Reanin-K3000 Polyurethane Foaming Machinery
Package size (LXWXH) 110X80X145cm
Net weight 183kg
Gross weight 220kg

 

Common phenomena and causes of problems:

1. The surface layer of the foam is not smooth

The key reason for this introduction is that the atomization is not good, especially in the domestic gas-mixed foaming machine, which can change the back pressure of the air compressor and the distance from the substrate. If necessary, it can be appropriate. Lengthen the air mixing nozzle and reduce the nozzle diameter. Imported high-pressure foaming equipment can be reasonably far away from the board. Another reason is that the polyurethane foaming time is too fast and the viscosity of the black and white material is too large.

 

2. Foam soft

Check the proportion of black and white materials, usually caused by too much white material. It is proposed to do one or two random foaming experiments according to a reasonable proportion. If it is still soft, it can increase the proportion of black material reasonably; if it is still soft, it is necessary to check whether the raw materials used in the white material should be added with appropriate amine. The amount of ether (i.e., the polyether of ethylenediamine as the initiator).

 

3. Foam plastic crisp

At this time, the cells are usually coarse, and the cause is that the water content in the system is too large. If only a part of the surface layer is crisp, consider whether the soft working temperature difference is too large, the material temperature is high, and the working temperature is low. Another reason is that the viscosity difference between black and white material is too large, and the black material is excessive.

 

After sales service:

1.Two-year warranty,

2.Factory free training,

3.Paying on-site service.

 

 

Hot Tags: polyurethane foam machinery, manufacturers, suppliers, wholesale, price

Products Inquiry

 
Online Service