Mob./WhatsApp/WeChat:
+86-18615199275
Hydraulic polyurethane foam machine

Hydraulic polyurethane foam machine

Reanin K7000 Hydraulic polyurethane foam machine can be widely used in building insulation and waterproofing, highway subgrade waterproofing or repairing, railway subgrade waterproofing, automobile thermal insulation and sound insulation, ship anti-corrosion and waterproofing, cold storage thermal insulation and other fields.

Product Details

Reanin K7000 Hydraulic polyurethane foam machine can be widely used in building insulation and waterproofing, highway subgrade waterproofing or repairing, railway subgrade waterproofing, automobile thermal insulation and sound insulation, ship anti-corrosion and waterproofing, cold storage thermal insulation and other fields.

 

Mainframe:

Function:

Increase the temperature and pressure of the raw materials to achieve the pressure and temperature required for the best mixing effect of the raw materials, and precisely control the raw material temperature and gas source pressure. The mainframe power supply requires three-phase 220V 60Hz or three-phase 380V 60Hz, which can be customized according to the actual needs of customers.

Advantage:

2.1 Adopt a hydraulic pressure boosting system, the starting speed is fast, and the system pressure runs smoothly.

2.2 Equipped with a complete protection system, it can not only protect the safety of construction personnel, but also ensure the safe use of equipment.

2.3 The design of electric-hydraulic drive mode makes it quieter than pneumatic equipment during operation and reduces noise by 80%. The unique drive design of the hydraulic system greatly improves the work efficiency of the entire system.

2.4 The parts that contact raw materials are mainly made of stainless steel, which has the effects of wear resistance and corrosion resistance.

 

 

 

Introduction of equipment structure and functions

 

 

Function: 

Extract raw materials from the raw material barrel, pressurize and transport to the mainframe.

The work of transfer pump requires external air source, and the air source requires 0.5-0.8MPa 1m3 / min.

Advantage:

  • Graco’s same 2: 1 large ratio transfer pump with large flow rate and high working pressure can extract materials with higher viscosity.
  • The whole pump is made of stainless steel, with the characteristics of wear resistance and corrosion resistance, which can extend the service life.
  • The structure of air material separation is adopted to improve the problem of long time penetration of raw materials into the cylinder in the traditional material transfer pump.
  • The sealing ring and piston components imported from Germany have the characteristics of wear resistance and corrosion resistance, more than 50% longer life than domestic components.

 

 

Function:

The temperature-increasing and pressure-increasing raw materials of the mainframe are delivered to the spraying and pouring gun, and the internal heating system provides the temperature-increasing and thermal insulation effect for the materials.

Advantage:

3.1The heating hose is heated by uniformly winding the heating originals. The heating is rapid and uniform, and the outer wear-resistant insulating sleeve can effectively protect the safety of the internal pipelines and electrical originals and prevent leakage of electricity.

3.2The low-voltage DC power supply is adopted. If damage or leakage occurs, it can avoid injury to the construction personnel.

3.3The interior is equipped with heating system and over-temperature protection system. When the raw material passes through the hose, it can effectively heat the raw material and maintain the temperature of the material output.

3.4Hose can withstand up to 40Mpa of working pressure, can effectively prevent leakage, short circuit and other phenomena.

 

Application:

 

 

 

Hot Tags: Hydraulic polyurethane foam machine, manufacturers, suppliers, wholesale, price

Products Inquiry

 
Online Service